Reifenhauser 3 layer extrusion line
|Machine||Reifenhauser 3 layer extrusion line|
|Type of extruder||Blown|
|Number of layers||3|
|Diameter die||500 mm|
|Lip opening||1,8 mm|
|Diameter screw(s)||70 - 80 - 70|
|L/D ratio screw(s)||30D|
|Material & Min — Max thickness||20 - 120 micron|
|Max. film width||2700 mm|
|Max. output||500 kg/hour|
|Max. rewind reel diameter||1000 mm|
|Rotating, which part||Take off|
Including direct edge re-feeding in extruders
|Other information||2010: New cooling ring with measuring system|
|Special characteristics||Calibrating basket|
|Available from||May 2019|
Extrusion in the flexible packaging industry can roughly be devided in three kinds of extrusion: blown film extrusion lines, cast film extrusion lines and BOPP extrusion lines.
Blown Film Extrusion
Blown film extrusion is the most common technology to produce plastic film. Blown film extrusion is typically carried out upwards vertically.
Film is made out of polymer material. These polymeres are generally in the form of granulate. This material is melted and then forced or extruded through a die. Air is blwon thourgh a hole in the center of the die. This pressure causes a bubble. This bubble is a thin layer of film. The film is pulled upwards from the die to cool down and winded on the a roll.
Blown film extrusion exists in various layers, the more layers the thicker the film. The process with more layers is called coextrusion.
Blownfilm lines, cast film lines, sheet extrusion and extrusion coating lines are all part of Reifenhäuser products. In 1911 Reifenhauser was founded as a forge. In the 1940’s the first extruder was introduced. In the years after Reifenhauser kept on innovating and inventing new solutions for the extrusion industry. In 2006 Reifenhäuser Extrusion was founded. Today this Geman company has its own private technocology center for research and development.