MAM 3 layer extrusion line
|Machine||MAM 3 layer extrusion line|
|Type of extruder||Blown|
|Number of layers||3|
|Diameter die||280 mm|
|Diameter screw(s)||70 mm|
|Material & Min – Max thickness||LDPE, LLDPE, MDPE|
|Max. film width||1800 mm|
|Max. output||350 kg/hour|
|Dosing unit||Yes, gravimetric|
|Tower construction included||Yes|
|Other information||Height 10,5 meter|
|Machine can be seen in production?||Yes|
Extrusion in the flexible packaging industry can roughly be devided in three kinds of extrusion: blown film extrusion lines, cast film extrusion lines and BOPP extrusion lines.
Blown Film Extrusion
Blown film extrusion is the most common technology to produce plastic film. Blown film extrusion is typically carried out upwards vertically.
Film is made out of polymer material. These polymeres are generally in the form of granulate. This material is melted and then forced or extruded through a die. Air is blwon thourgh a hole in the center of the die. This pressure causes a bubble. This bubble is a thin layer of film. The film is pulled upwards from the die to cool down and winded on the a roll.
Blown film extrusion exists in various layers, the more layers the thicker the film. The process with more layers is called coextrusion.
- 3 layer