Macro 9 layer extrusion line
|Machine||Macro 9 layer extrusion line|
|Machine manufacturer||Macro Engineering|
|Type of extruder||Blown|
|Year||2013 (in production)|
|Number of layers||9|
|Diameter die||230 mm|
|Diameter screw(s)||7 x 45 mm
2 x 50 mm
|Material & Min – Max thickness||LDPE,LLDPE, mPE, PP, Acid Copolymer, Coex tie resins, EVA, Ionomer, EVOH, PET, Nylon|
|Max. film width||1000 mm|
|Min. – Max. film thickness||30 - 250 micron|
|Max. output||250 kg/hour|
|Rewind type||Stacked double turret|
|Max. rewind reel diameter||500 mm|
|Rotating, which part||Take off|
|Dosing unit||Yes, gravimetric|
|Thickness measurement||Yes, X-ray|
|Edge guide(s)||Yes, E&L|
|Tower construction included||Yes|
|Other information||Perfect as test/lab unit|
|Machine can be seen in production?||Yes|
Extrusion in the flexible packaging industry can roughly be devided in three kinds of extrusion: blown film extrusion lines, cast film extrusion lines and BOPP extrusion lines.
Blown Film Extrusion
Blown film extrusion is the most common technology to produce plastic film. Blown film extrusion is typically carried out upwards vertically.
Film is made out of polymer material. These polymeres are generally in the form of granulate. This material is melted and then forced or extruded through a die. Air is blwon thourgh a hole in the center of the die. This pressure causes a bubble. This bubble is a thin layer of film. The film is pulled upwards from the die to cool down and winded on the a roll.
Blown film extrusion exists in various layers, the more layers the thicker the film. The process with more layers is called coextrusion.
- blown film