Battenfeld 3 layer blown film extrusion line

E16017
Machine Battenfeld 3 layer blown film extrusion line
Reference number E16017
Machine manufacturer Battenfeld
Type of extruder Blown
Year 1993
Number of layers 3
Diameter die 550 mm
Diameter screw(s) 120 / 120 / 90
Material & Min – Max thickness PE, 25 - 150 micron
Max. film width 2000 mm
Max. output 450 kg/hour
Rewind manufacturer Battenfeld
Rewind type Dual stacked turret winder
Max. rewind reel diameter 750 mm
Type of screen changer Hydraulic (1 Extek and 2 Tierod)
Dosing unit No, bus some loaders
IBC No
Corona treater Yes, Sherman treaters
Other information Plastcontrol line management
Airring Plastcontrol Magic Flow K7500 (Oct. 2010)
Tower and haul off optional for additional price
Spare die to same specifications for additional price
Including 3 and 6 inch rewind bars
Unloading system available to lift bars from reels
Subject to unsold. Although believed to be correct, the machine specifications and lists supplied are based solely upon those provided by the original owners.

Battenfeld – Extruders
Extrusion in the flexible packaging industry can roughly be devided in three kinds of extrusion: blown film extrusion lines, cast film extrusion lines and BOPP extrusion lines.

Blown Film Extrusion

Blown film extrusion is the most common technology to produce plastic film. Blown film extrusion is typically carried out upwards vertically.
Film is made out of polymer material. These polymeres are generally in the form of granulate. This material is melted and then forced or extruded through a die. Air is blwon thourgh a hole in the center of the die. This pressure causes a bubble. This bubble is a thin layer of film. The film is pulled upwards from the die to cool down and winded on the a roll.
Blown film extrusion exists in various layers, the more layers the thicker the film.  The process with more layers is called coextrusion.

  • Extruder
  • Used
  • 3 layer
  • blown film
  • Battenfeld
  • E16017
[tab-area1]
[tab-area2]
[tab-area3]

Máquinas relacionadas